dmesg - cpu test
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.4.79+ (liaods@linux-server) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #32 SMP PREEMPT Thu Aug 7 12:57:51 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
[ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0aeab00, node_mem_map d0000000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s6656 r8192 d13824 u32768
[ 0.000000] pcpu-alloc: s6656 r8192 d13824 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 loglevel=8 panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 895288k/895288k available, 153288k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08ce700 (8986 kB)
[ 0.000000] .init : 0xc08cf000 - 0xc0a6aa00 (1647 kB)
[ 0.000000] .data : 0xc0a6c000 - 0xc0af6d98 ( 556 kB)
[ 0.000000] .bss : 0xc0af6dbc - 0xc0cc2908 (1839 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:192
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] start_kernel(): bug: interrupts were enabled early
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000717] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
[ 0.059951] pid_max: default: 32768 minimum: 301
[ 0.060154] Mount-cache hash table entries: 512
[ 0.060968] Initializing cgroup subsys cpuacct
[ 0.061003] Initializing cgroup subsys devices
[ 0.061024] Initializing cgroup subsys freezer
[ 0.061043] Initializing cgroup subsys blkio
[ 0.061141] CPU: Testing write buffer coherency: ok
[ 0.061371] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.061430] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.061512] Setting up static identity map for 0x40608a28 - 0x40608a5c
[ 0.174292] CPU1: Booted secondary processor
[ 0.231670] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.231749] Brought up 2 CPUs
[ 0.231805] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
[ 0.232677] devtmpfs: initialized
[ 0.236872] dummy:
[ 0.237141] NET: Registered protocol family 16
[ 0.237508] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.238075] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.238112] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.238147] [ccu-inf] aw clock manager init
[ 0.238165] [ccu-inf] aw_ccu_init
[ 0.238382] [ccu-inf] script config pll3 to 297MHz
[ 0.238412] [ccu-inf] script config pll4 to 300MHz
[ 0.238435] [ccu-inf] script config pll6 to 600MHz
[ 0.238458] [ccu-inf] script config pll7 to 297MHz
[ 0.238481] [ccu-inf] script config pll8 to 336MHz
[ 0.238626] Init eGon pin module V2.0
[ 0.247862] bio: create slab at 0
[ 0.248433] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.248828] SCSI subsystem initialized
[ 0.249016] libata version 3.00 loaded.
[ 0.249253] usbcore: registered new interface driver usbfs
[ 0.249363] usbcore: registered new interface driver hub
[ 0.249489] usbcore: registered new device driver usb
[ 0.249612] Linux media interface: v0.10
[ 0.249667] Linux video capture interface: v2.00
[ 0.249929] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.250426] Bluetooth: Core ver 2.16
[ 0.250502] NET: Registered protocol family 31
[ 0.250524] Bluetooth: HCI device and connection manager initialized
[ 0.250552] Bluetooth: HCI socket layer initialized
[ 0.250575] Bluetooth: L2CAP socket layer initialized
[ 0.250612] Bluetooth: SCO socket layer initialized
[ 0.250976] Switching to clocksource arch_sys_counter
[ 0.251251] FS-Cache: Loaded
[ 0.251402] CacheFiles: Loaded
[ 0.259203] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_DEVICE_ONLY
[ 0.259339] [sw_hcd0]: usb host driver initialize........
[ 0.259792] NET: Registered protocol family 2
[ 0.260048] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.260599] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.262511] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.263498] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.263524] TCP: reno registered
[ 0.263547] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.263597] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.263901] NET: Registered protocol family 1
[ 0.264423] RPC: Registered named UNIX socket transport module.
[ 0.264456] RPC: Registered udp transport module.
[ 0.264475] RPC: Registered tcp transport module.
[ 0.264493] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.940846] audit: initializing netlink socket (disabled)
[ 0.940941] type=2000 audit(0.920:1): initialized
[ 0.942095] highmem bounce pool size: 64 pages
[ 0.950730] VFS: Disk quotas dquot_6.5.2
[ 0.951091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.953553] NFS: Registering the id_resolver key type
[ 0.954802] NTFS driver 2.1.30 [Flags: R/W].
[ 0.955179] fuse init (API version 7.18)
[ 0.955763] msgmni has been set to 1220
[ 0.959639] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[ 0.959798] alg: No test for stdrng (krng)
[ 0.960121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.960162] io scheduler noop registered
[ 0.960180] io scheduler deadline registered
[ 0.960224] io scheduler cfq registered (default)
[ 0.960597] I2C: i2c-10: HDMI I2C adapter
[ 0.981056] ParseEDID
[ 0.997325] EDID version: 1.3
[ 0.997351] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[ 0.997383] Using above mode as preferred EDID mode
[ 1.007317] set to HDMI mode
[ 1.007338] Parse_VideoData_Block: VIC 16 (native) support
[ 1.007359] Parse_VideoData_Block: VIC 5 support
[ 1.007377] Parse_VideoData_Block: VIC 4 support
[ 1.007395] Parse_VideoData_Block: VIC 3 support
[ 1.007413] Parse_VideoData_Block: VIC 2 support
[ 1.007431] Parse_VideoData_Block: VIC 1 support
[ 1.007449] Parse_VideoData_Block: VIC 31 (native) support
[ 1.007469] Parse_VideoData_Block: VIC 22 support
[ 1.007487] Parse_VideoData_Block: VIC 21 support
[ 1.007505] Parse_VideoData_Block: VIC 20 support
[ 1.007523] Parse_VideoData_Block: VIC 19 support
[ 1.007541] Parse_VideoData_Block: VIC 18 support
[ 1.007559] Parse_VideoData_Block: VIC 17 support
[ 1.007578] Parse_AudioData_Block: max channel=2
[ 1.007596] Parse_AudioData_Block: SampleRate code=7
[ 1.007614] Parse_AudioData_Block: WordLen code=7
[ 1.007632] Find HDMI Vendor Specific DataBlock
[ 1.007656] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[ 1.007683] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[ 1.007711] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[ 1.007742] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[ 1.007770] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[ 1.008145] disp clks: lcd 25200000 pre_scale 1 hdmi 25200000 pll 252000000 2x 0
[ 1.031066] get_hdmi_mode == HDMI
[ 2.179363] Console: switching to colour frame buffer device 80x30
[ 2.233144] [uart]: used uart info.: 0x05
[ 2.235304] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 2.258052] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 3.127869] console [ttyS0] enabled
[ 3.133930] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 3.171265] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 3.181453] G2D: drv_g2d_init
[ 3.187048] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[ 3.195574] G2D: head:c9000000,tail:ca000000
[ 3.202654] G2D: Module initialized.major:248
[ 3.210725] brd: module loaded
[ 3.219672] loop: module loaded
[ 3.225690] [NAND] nand driver version: 0x2 0x9
[ 3.284397] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
[ 3.294373] Dev Sunxi softw311 nand magic does not match for MBR 2:
[ 3.304208] Dev Sunxi softw311 nand magic does not match for MBR 3:
[ 3.313913] Dev Sunxi softw311 nand magic does not match for MBR 4:
[ 3.323540] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
[ 3.341108] Dev Sunxi softw411 nand: part 1, start 32768, size 65536
[ 3.349992] Dev Sunxi softw411 nand: part 2, start 98304, size 32768
[ 3.358742] Dev Sunxi softw411 nand: part 3, start 131072, size 32768
[ 3.367559] Dev Sunxi softw411 nand: part 4, start 163840, size 7618560
[ 3.376466] nand: nanda nandb nandc nandd
[ 3.383839] [NAND]nand driver, ok.
[ 3.389832] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 3.399142] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 3.406720] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 3.419491] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 3.432020] scsi0 : sw_ahci_platform
[ 3.438064] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 3.450827] [spi]: sw spi init !!
[ 3.456506] [spi]: Found 2 spi devices in config files
[ 3.464033] [spi]: boards num modalias max_spd_hz bus_num cs mode
[ 3.476319] [spi]: spi_board0 irq gpio not used
[ 3.483289] [spi]: 0 spidev 12000000 0 0 0x3
[ 3.496067] [spi]: spi_board1 irq gpio not used
[ 3.503175] [spi]: 1 spidev 12000000 2 0 0x0
[ 3.516037] [spi]: bus num = 0, spi used = 1
[ 3.523182] [spi]: source = sdram_pll_p, src_clk = 480000000, mclk 96000000
[ 3.532906] sun7i-spi sun7i-spi.0: master is unqueued, this is deprecated
[ 3.542456] spi_sunxi_setup 1315
[ 3.548341] spi_sunxi_setup 1352
[ 3.554405] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-0 with 2 Slaves attached
[ 3.567804] [spi]: [spi-0]: driver probe succeed, base f01fc000, irq 42, dma_tx_id 27, dma_rx_id 26!
[ 3.582431] [spi]: bus num = 2, spi used = 1
[ 3.589652] [spi]: source = sdram_pll_p, src_clk = 480000000, mclk 96000000
[ 3.599432] sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
[ 3.609022] spi_sunxi_setup 1315
[ 3.614938] spi_sunxi_setup 1352
[ 3.620894] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-2 with 2 Slaves attached
[ 3.634316] [spi]: [spi-2]: driver probe succeed, base f01fe000, irq 44, dma_tx_id 29, dma_rx_id 26!
[ 3.649039] tun: Universal TUN/TAP device driver, 1.6
[ 3.656910] tun: (C) 1999-2004 Max Krasnyansky
[ 3.666341] eth%d: device MAC address 1e:b0:ce:8d:00:61
[ 3.674975] [gmac]: sun6i_gmac platform driver registration completed
[ 3.684460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.694034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.703483] [sw-ehci1]: open clock
[ 3.729897] [sw-ehci1]: Set USB Power ON
[ 3.736713] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.750099] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 3.760380] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[ 3.781062] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 3.789409] ehci_irq: port change detect
[ 3.791077] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.804567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.814300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.827165] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.840472] usb usb1: Manufacturer: Linux 3.4.79+ ehci_hcd
[ 3.848974] usb usb1: SerialNumber: sw-ehci
[ 3.856577] hub 1-0:1.0: USB hub found
[ 3.863202] hub 1-0:1.0: 1 port detected
[ 3.870267] [sw-ohci1]: open clock
[ 3.896383] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 3.906337] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 3.916184] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[ 3.985128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.994678] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.007207] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.017207] usb usb2: Manufacturer: Linux 3.4.79+ ohci_hcd
[ 4.025494] usb usb2: SerialNumber: sw-ohci
[ 4.032830] hub 2-0:1.0: USB hub found
[ 4.039197] hub 2-0:1.0: 1 port detected
[ 4.046077] [sw-ehci2]: open clock
[ 4.072142] [sw-ehci2]: Set USB Power ON
[ 4.078580] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.091179] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 4.101014] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[ 4.181081] usb 1-1: new high-speed USB device number 2 using sw-ehci
[ 4.201077] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 4.209039] ehci_irq: port change detect
[ 4.215579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.225008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.237454] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.250428] usb usb3: Manufacturer: Linux 3.4.79+ ehci_hcd
[ 4.258738] usb usb3: SerialNumber: sw-ehci
[ 4.266117] hub 3-0:1.0: USB hub found
[ 4.272665] hub 3-0:1.0: 1 port detected
[ 4.279596] [sw-ohci2]: open clock
[ 4.305599] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.315459] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 4.325228] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[ 4.361900] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179
[ 4.371368] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.381276] usb 1-1: Product: 802.11n NIC
[ 4.388019] usb 1-1: Manufacturer: Realtek
[ 4.398929] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.408540] usb 1-1: SerialNumber: 00E04C0001
[ 4.415928] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.428983] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.438972] usb usb4: Manufacturer: Linux 3.4.79+ ohci_hcd
[ 4.447259] usb usb4: SerialNumber: sw-ohci
[ 4.454568] hub 4-0:1.0: USB hub found
[ 4.461014] hub 4-0:1.0: 1 port detected
[ 4.467977] usbcore: registered new interface driver cdc_acm
[ 4.476385] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.489535] Initializing USB Mass Storage driver...
[ 4.497163] usbcore: registered new interface driver usb-storage
[ 4.505847] USB Mass Storage support registered.
[ 4.513266] usbcore: registered new interface driver libusual
[ 4.521860] usbcore: registered new interface driver ums-alauda
[ 4.530538] usbcore: registered new interface driver ums-cypress
[ 4.539187] ehci_irq: port change detect
[ 4.545784] usbcore: registered new interface driver ums-datafab
[ 4.554510] usbcore: registered new interface driver ums_eneub6250
[ 4.563340] usbcore: registered new interface driver ums-freecom
[ 4.571884] usbcore: registered new interface driver ums-isd200
[ 4.580248] usbcore: registered new interface driver ums-jumpshot
[ 4.588762] usbcore: registered new interface driver ums-karma
[ 4.596920] usbcore: registered new interface driver ums-onetouch
[ 4.605259] usbcore: registered new interface driver ums-sddr09
[ 4.613325] The port change to OHCI now!
[ 4.619315] usbcore: registered new interface driver ums-sddr55
[ 4.627308] usbcore: registered new interface driver ums-usbat
[ 4.635204] usbcore: registered new interface driver usbserial
[ 4.642992] usbcore: registered new interface driver usbserial_generic
[ 4.651410] USB Serial support registered for generic
[ 4.664758] usbcore: registered new interface driver aircable
[ 4.672419] USB Serial support registered for aircable
[ 4.679436] usbcore: registered new interface driver ark3116
[ 4.686973] USB Serial support registered for ark3116
[ 4.693892] usbcore: registered new interface driver belkin
[ 4.701310] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 4.713321] usbcore: registered new interface driver ch341
[ 4.720857] USB Serial support registered for ch341-uart
[ 4.728278] usbcore: registered new interface driver cp210x
[ 4.735898] USB Serial support registered for cp210x
[ 4.743038] usbcore: registered new interface driver cyberjack
[ 4.751067] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 4.763234] usbcore: registered new interface driver cypress
[ 4.771397] USB Serial support registered for DeLorme Earthmate USB
[ 4.780255] USB Serial support registered for HID->COM RS232 Adapter
[ 4.789237] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 4.798175] usbcore: registered new interface driver debug
[ 4.806227] usb 4-1: new full-speed USB device number 2 using sw-ohci
[ 4.815343] USB Serial support registered for debug
[ 4.823025] usbcore: registered new interface driver digi_acceleport
[ 4.832281] USB Serial support registered for Digi 2 port USB adapter
[ 4.841585] USB Serial support registered for Digi 4 port USB adapter
[ 4.850814] usbcore: registered new interface driver io_edgeport
[ 4.859634] USB Serial support registered for Edgeport 2 port adapter
[ 4.868874] USB Serial support registered for Edgeport 4 port adapter
[ 4.878025] USB Serial support registered for Edgeport 8 port adapter
[ 4.887081] USB Serial support registered for EPiC device
[ 4.895065] usbcore: registered new interface driver io_ti
[ 4.903067] USB Serial support registered for Edgeport TI 1 port adapter
[ 4.912320] USB Serial support registered for Edgeport TI 2 port adapter
[ 4.921529] usbcore: registered new interface driver empeg
[ 4.929429] USB Serial support registered for empeg
[ 4.936735] usbcore: registered new interface driver f81232
[ 4.944726] USB Serial support registered for f81232
[ 4.952112] usbcore: registered new interface driver ftdi_sio
[ 4.960240] USB Serial support registered for FTDI USB Serial Device
[ 4.969064] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 4.977343] usbcore: registered new interface driver funsoft
[ 4.985423] USB Serial support registered for funsoft
[ 4.992925] usbcore: registered new interface driver garmin_gps
[ 5.001331] USB Serial support registered for Garmin GPS usb/tty
[ 5.009830] usbcore: registered new interface driver hp4X
[ 5.017726] USB Serial support registered for hp4X
[ 5.025041] usbcore: registered new interface driver ipaq
[ 5.032879] USB Serial support registered for PocketPC PDA
[ 5.040849] ipaq: v1.0:USB PocketPC PDA driver
[ 5.047805] usbcore: registered new interface driver ipwtty
[ 5.055976] USB Serial support registered for IPWireless converter
[ 5.064742] usbcore: registered new interface driver ir-usb
[ 5.072894] USB Serial support registered for IR Dongle
[ 5.080783] ir_usb: v0.5:USB IR Dongle driver
[ 5.087835] usbcore: registered new interface driver iuu_phoenix
[ 5.096561] usb 4-1: New USB device found, idVendor=24ae, idProduct=2000
[ 5.105991] USB Serial support registered for iuu_phoenix
[ 5.114166] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.124206] usbcore: registered new interface driver keyspan
[ 5.132692] usb 4-1: Product: RAPOO 2.4G Wireless Device
[ 5.140784] usb 4-1: Manufacturer: RAPOO
[ 5.147508] USB Serial support registered for Keyspan - (without firmware)
[ 5.157257] USB Serial support registered for Keyspan 1 port adapter
[ 5.166499] USB Serial support registered for Keyspan 2 port adapter
[ 5.175607] USB Serial support registered for Keyspan 4 port adapter
[ 5.184736] usbcore: registered new interface driver keyspan_pda
[ 5.193397] USB Serial support registered for Keyspan PDA
[ 5.201409] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 5.211120] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 5.224098] usbcore: registered new interface driver kl5kusb105d
[ 5.232709] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 5.241992] usbcore: registered new interface driver kobil
[ 5.250112] USB Serial support registered for KOBIL USB smart card terminal
[ 5.259810] usbcore: registered new interface driver mct_u232
[ 5.268234] USB Serial support registered for MCT U232
[ 5.276060] usbcore: registered new interface driver metro-usb
[ 5.284568] USB Serial support registered for Metrologic USB to serial converter.
[ 5.297417] usbcore: registered new interface driver moschip7720
[ 5.306198] USB Serial support registered for Moschip 2 port adapter
[ 5.315354] usbcore: registered new interface driver mos7840
[ 5.323792] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 5.336710] usbcore: registered new interface driver moto-modem
[ 5.345486] USB Serial support registered for moto-modem
[ 5.353645] usbcore: registered new interface driver navman
[ 5.362099] USB Serial support registered for navman
[ 5.370041] usbcore: registered new interface driver omninet
[ 5.378758] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 5.388841] usbcore: registered new interface driver opticon
[ 5.397583] USB Serial support registered for opticon
[ 5.405792] usbcore: registered new interface driver option
[ 5.414537] USB Serial support registered for GSM modem (1-port)
[ 5.423952] usbcore: registered new interface driver oti6858
[ 5.432755] USB Serial support registered for oti6858
[ 5.440905] usbcore: registered new interface driver pl2303
[ 5.449548] USB Serial support registered for pl2303
[ 5.457576] usbcore: registered new interface driver qcaux
[ 5.466071] USB Serial support registered for qcaux
[ 5.473961] usbcore: registered new interface driver qcserial
[ 5.482704] USB Serial support registered for Qualcomm USB modem
[ 5.500114] usbcore: registered new interface driver safe_serial
[ 5.509065] USB Serial support registered for safe_serial
[ 5.517415] usbcore: registered new interface driver siemens_mpi
[ 5.526397] USB Serial support registered for siemens_mpi
[ 5.534715] usbcore: registered new interface driver sierra
[ 5.543127] USB Serial support registered for Sierra USB modem
[ 5.551827] usbcore: registered new interface driver spcp8x5
[ 5.560276] USB Serial support registered for SPCP8x5
[ 5.568156] usbcore: registered new interface driver ssu100
[ 5.576539] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 5.589674] usbcore: registered new interface driver symbol
[ 5.598088] USB Serial support registered for symbol
[ 5.605912] usbcore: registered new interface driver ti_usb_3410_5052
[ 5.615238] USB Serial support registered for TI USB 3410 1 port adapter
[ 5.624832] USB Serial support registered for TI USB 5052 2 port adapter
[ 5.634321] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 5.643344] usbcore: registered new interface driver visor
[ 5.651665] USB Serial support registered for Handspring Visor / Palm OS
[ 5.661240] USB Serial support registered for Sony Clie 5.0
[ 5.669603] USB Serial support registered for Sony Clie 3.5
[ 5.677887] visor: USB HandSpring Visor / Palm OS driver
[ 5.685936] usbcore: registered new interface driver whiteheat
[ 5.694498] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 5.708151] USB Serial support registered for Connect Tech - WhiteHEAT
[ 5.717534] usbcore: registered new interface driver vivopay-serial
[ 5.726676] USB Serial support registered for vivopay-serial
[ 5.735222] usbcore: registered new interface driver zio
[ 5.743368] USB Serial support registered for zio
[ 5.750902] usbcore: registered new interface driver trancevibrator
[ 5.760263] mousedev: PS/2 mouse device common for all mice
[ 5.769352] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
[ 5.778073] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 5.787004] i2c /dev entries driver
[ 5.793743] config i2c gpio with gpio_config api
[ 5.802358] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[ 5.810886] I2C: i2c-0: AW16XX I2C adapter
[ 5.817919] I2C: i2c-1: AW16XX I2C adapter
[ 5.824787] I2C: i2c-2: AW16XX I2C adapter
[ 5.831553] lirc_dev: IR Remote Control driver registered, major 247
[ 5.840522] IR NEC protocol handler initialized
[ 5.847557] IR RC5(x) protocol handler initialized
[ 5.854802] IR RC6 protocol handler initialized
[ 5.861799] IR JVC protocol handler initialized
[ 5.868783] IR Sony protocol handler initialized
[ 5.875840] IR RC5 (streamzap) protocol handler initialized
[ 5.883865] IR SANYO protocol handler initialized
[ 5.890949] IR MCE Keyboard/mouse protocol handler initialized
[ 5.899156] IR LIRC bridge handler initialized
[ 5.906068] usbcore: registered new interface driver uvcvideo
[ 5.914160] USB Video Class driver (1.1.1)
[ 5.920560] [cedar dev]: install start!!!
[ 5.927228] [cedar dev]: install end!!!
[ 5.933259] [tt]----- avs_dev driver load... ----
[ 5.940100] [tt]----- register iomem ----
[ 5.947085] Cannot reserve region for ccmu
[ 5.953364] [tt]--- avs_dev driver load ok!! -----
[ 5.960231] [ace_drv] start!!!
[ 5.965575] [ace_drv] init end!!!
[ 5.970852] [pa_drv] start!!!
[ 5.975999] [pa_drv] init end!!!
[ 5.981212] axp20_ldo1: 1300 mV
[ 5.987485] axp20_ldo2: 1800 3300 mV at 3000 mV
[ 5.995641] axp20_ldo3: 700 3500 mV at 2800 mV
[ 6.003858] axp20_ldo4: 1250 3300 mV at 2800 mV
[ 6.011901] axp20_buck2: 700 2275 mV at 1400 mV
[ 6.019905] axp20_buck3: 700 3500 mV at 1250 mV
[ 6.027413] axp20_ldoio0: 1800 3300 mV at 2800 mV
[ 6.035102] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 6.063054] axp20_ldo2: Failed to create debugfs directory
[ 6.071314] Bluetooth: HCI UART driver ver 2.2
[ 6.077757] Bluetooth: HCI H4 protocol initialized
[ 6.084500] Bluetooth: HCI BCSP protocol initialized
[ 6.091360] Bluetooth: HCILL protocol initialized
[ 6.097899] Bluetooth: HCIATH3K protocol initialized
[ 6.104851] usbcore: registered new interface driver btusb
[ 6.112289] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 6.119947] [mmc-msg] sw_mci_init
[ 6.125300] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[ 6.134340] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 6.142566] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 6.156850] [mmc-msg] sdc0 Probe: base:0xf0254000 irq:64 sg_cpu:f0256000(4fc00000) ret 0.
[ 6.169653] [mmc_pm]: failed to fetch sdio card configuration!
[ 6.181883] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input1
[ 6.197611] generic-usb 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-sw-ohci-1/input0
[ 6.223791] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.1/input/input2
[ 6.240601] generic-usb 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-sw-ohci-1/input1
[ 6.259990] usbcore: registered new interface driver usbhid
[ 6.268623] usbhid: USB HID core driver
[ 6.275997] logger: created 256K log 'log_main'
[ 6.283702] logger: created 256K log 'log_events'
[ 6.291528] logger: created 256K log 'log_radio'
[ 6.299235] logger: created 256K log 'log_system'
[ 6.307323] usbcore: registered new interface driver snd-usb-audio
[ 6.318753] asoc: sndhdmi sunxi-hdmiaudio.0 mapping ok
[ 6.328126] pktgen: Packet Generator for packet performance testing. Version: 2.74
[ 6.342132] nf_conntrack version 0.5.0 (13988 buckets, 55952 max)
[ 6.351834] IPVS: Registered protocols ()
[ 6.359004] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 6.372578] IPVS: Creating netns size=880 id=0
[ 6.380061] IPVS: ipvs loaded.
[ 6.386201] IPv4 over IPv4 tunneling driver
[ 6.394011] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.402338] arp_tables: (C) 2002 David S. Miller
[ 6.409761] TCP: cubic registered
[ 6.415746] Initializing XFRM netlink socket
[ 6.423226] NET: Registered protocol family 10
[ 6.431159] IPv6 over IPv4 tunneling driver
[ 6.438360] NET: Registered protocol family 17
[ 6.445284] NET: Registered protocol family 15
[ 6.452114] Bridge firewalling registered
[ 6.458578] Bluetooth: RFCOMM TTY layer initialized
[ 6.465766] Bluetooth: RFCOMM socket layer initialized
[ 6.473190] Bluetooth: RFCOMM ver 1.11
[ 6.479208] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.486877] Bluetooth: BNEP filters: protocol multicast
[ 6.494414] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.502780] 8021q: 802.1Q VLAN Support v1.8
[ 6.509230] [mmc_pm]: No sdio card, please check your config !!
[ 6.517393] Registering the dns_resolver key type
[ 6.524572] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 6.536671] Registering SWP/SWPB emulation handler
[ 6.544072] registered taskstats version 1
[ 6.550895] axp20_buck3: incomplete constraints, leaving on
[ 6.558956] axp20_buck2: incomplete constraints, leaving on
[ 6.566953] axp20_ldo4: incomplete constraints, leaving on
[ 6.574841] axp20_ldo3: incomplete constraints, leaving on
[ 6.582648] axp20_ldo2: incomplete constraints, leaving on
[ 6.590372] axp20_ldo1: incomplete constraints, leaving on
[ 6.598024] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
[ 6.610689] ALSA device list:
[ 6.615688] #0: sunxi-CODEC Audio Codec
[ 6.621872] #1: sunxi-sndhdmi
[ 6.628938] Freeing init memory: 1644K
[ 6.941706] Warning: this sunxi disp driver will see significant redesign.
[ 6.950814] Applications using /dev/disp directly will break.
[ 6.959110] For more information visit:
[ 6.971256] disp: process 61 (setwindow) has skipped the version handshake.
[ 7.146061] [mmc-msg] mmc 0 detect change, present 1
[ 7.651082] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.664754] [mmc-msg] sdc0 power on
[ 7.691060] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.705223] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 7.783387] [mmc-err] smc 0 err, cmd 52, RTO
[ 7.791072] [mmc-err] smc 0 err, cmd 52, RTO
[ 7.797941] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.815043] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.832047] [mmc-err] smc 0 err, cmd 5, RTO
[ 7.839892] [mmc-err] smc 0 err, cmd 5, RTO
[ 7.847687] [mmc-err] smc 0 err, cmd 5, RTO
[ 7.855442] [mmc-err] smc 0 err, cmd 5, RTO
[ 7.863002] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.877643] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.894699] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 7.943519] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 7.958354] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 7.973499] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[ 8.037725] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 8.058150] mmc0: new high speed SDHC card at address 0007
[ 8.067161] mmcblk0: mmc0:0007 SD32G 29.3 GiB
[ 8.076402] mmcblk0: p1 p2
[ 9.395198] kjournald starting. Commit interval 5 seconds
[ 9.405902] EXT3-fs (mmcblk0p2): using internal journal
[ 9.414070] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 9.918321] init: ureadahead main process (82) terminated with status 5
[ 10.824660] udevd[186]: starting version 175
[ 11.265235] UMP: Inserting UMP device driver. Compiled: Apr 30 2014, time: 09:35:53
[ 11.268024] UMP: Using OS memory backend, allocation limit: 134217728
[ 11.268052] UMP: UMP device driver loaded
[ 11.482625] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
[ 11.482706] mali: use config clk_div 1
[ 11.482715] mali: clk_div 1
[ 11.482730] Mali: mali clock set completed, clock is 312000000 Hz
[ 11.500322] mali: use config clk_div 1
[ 11.500338] mali: clk_div 1
[ 11.500354] Mali: mali clock set completed, clock is 312000000 Hz
[ 11.502184] Mali: Mali device driver loaded
[ 11.613582] [drm] Initialized drm 1.1.0 20060810
[ 11.617100] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 11.619695] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 11.619814] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 11.625560] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 11.773984] ERR: script_parser_fetch usb_controller_type failed
[ 11.774225] usbcore: registered new interface driver rtl8192cu
[ 11.879857] sw_usb_enable_hcd: usbc_num = 2
[ 11.879877] ERR: script_parser_fetch usb_controller_type failed
[ 12.404280] usbcore: registered new interface driver rtl8188eu
[ 12.548111] rtusb init rt2870 --->
[ 12.548146] sw_usb_enable_hcd: usbc_num = 2
[ 12.548161] ERR: script_parser_fetch usb_controller_type failed
[ 12.564645] usbcore: registered new interface driver rt2870
[ 12.677507] [sw_udc]: udc_init: version 20080411
[ 12.677598] [sw_udc]: usb_vbase = 0xf1c13000
[ 12.677609] [sw_udc]: sram_vbase = 0xf1c00000
[ 12.677649] [sw_udc]: open_usb_clock
[ 12.772143] udc->driver is null, udc is need not stop
[ 12.809821] [sw_udc]: [sw_usb_udc]: binding gadget driver 'g_ether'
[ 12.809848] [sw_udc]: alloc request: ep(0xbf213190, ep0, 64), req(0xee230200)
[ 12.809953] g_ether gadget: using random host ethernet address
[ 12.810640] usb0: MAC 00:11:22:33:44:55
[ 12.810653] usb0: HOST MAC b2:78:c4:4e:67:44
[ 12.816473] ep_matches, wrn: endpoint already claimed, ep(0xbf2131dc, 0xee671400, ep1-bulk)
[ 12.816499] ep_matches, wrn: endpoint already claimed, ep(0xbf2131dc, 0xee671400, ep1-bulk)
[ 12.816512] ep_matches, wrn: endpoint already claimed, ep(0xbf213228, 0xee671400, ep2-bulk)
[ 12.816525] [sw_udc]: alloc request: ep(0xbf213274, ep3-bulk, 512), req(0xee4e87c0)
[ 12.816567] ep_matches, wrn: endpoint already claimed, ep(0xbf2131dc, 0xee671400, ep1-bulk)
[ 12.816580] ep_matches, wrn: endpoint already claimed, ep(0xbf2131dc, 0xee671400, ep1-bulk)
[ 12.816592] ep_matches, wrn: endpoint already claimed, ep(0xbf213228, 0xee671400, ep2-bulk)
[ 12.816603] [sw_udc]: alloc request: ep(0xbf213274, ep3-bulk, 512), req(0xee4e8840)
[ 12.816627] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 12.816657] g_ether gadget: g_ether ready
[ 12.816666] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
[ 12.816679] [sw_udc]: usbd_start_work
[ 12.869197] [kpad]: sw keypad init
[ 12.869664] [kpad]: sw keypad probe
[ 12.869758] [kpad]: key_code_0: PH17, code=1
[ 12.869783] [kpad]: key_code_1: PH18, code=57
[ 12.869805] [kpad]: key_code_2: PH19, code=28
[ 12.869841] sw_keypad_irq status=0x00020000
[ 12.869851] mask=0x000e0000 irq_num = 17, code=1
[ 12.871911] input: sb-keypad as /devices/platform/sb-keypad/input/input3
[ 12.872133] [sw_udc]: IRQ: suspend
[ 12.872147] [sw_udc]: ERR: usb speed is unkown
[ 12.872440] [kpad]: sw keypad probe done, irq 60
[ 12.971990] [sw_udc]: IRQ: reset
[ 12.972010] [sw_udc]: irq: reset happen, throw away all urb
[ 13.018758] [CSI]Welcome to CSI driver
[ 13.018773] [CSI]csi_init
[ 13.049430] [CSI]registered sub device,input_num = 0
[ 13.049780] [CSI]V4L2 device registered as video0
[ 13.138715] [sw_udc]:
[ 13.138739] +++++++++++++++++++++++++++++++++++++
[ 13.138747] [sw_udc]: usb enter high speed.
[ 13.138757] [sw_udc]:
[ 13.138762] +++++++++++++++++++++++++++++++++++++
[ 13.143505] [sw_udc]: IRQ: reset
[ 13.143530] [sw_udc]: irq: reset happen, throw away all urb
[ 13.379507] [sw_udc]: Set address 1
[ 13.395692] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[ 13.395714] [sw_udc]: ep enable: ep3(0xbf213274, ep3-bulk, 128, 16)
[ 13.395810] nuke: ep num is 0
[ 13.461436] [sw_udc]: ep enable: ep1(0xbf2131dc, ep1-bulk, 128, 512)
[ 13.461475] [sw_udc]: ep enable: ep2(0xbf213228, ep2-bulk, 0, 512)
[ 13.461494] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087300)
[ 13.461509] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087f40)
[ 13.461522] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087a40)
[ 13.461536] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087480)
[ 13.461549] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087f00)
[ 13.461562] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087fc0)
[ 13.461577] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xef087b40)
[ 13.461591] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xee039640)
[ 13.461605] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xee0396c0)
[ 13.461620] [sw_udc]: alloc request: ep(0xbf2131dc, ep1-bulk, 512), req(0xee5a0800)
[ 13.461635] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee7a2f80)
[ 13.461649] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee7a2fc0)
[ 13.461663] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee7a2a80)
[ 13.461677] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee236280)
[ 13.461691] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee236240)
[ 13.461704] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee2362c0)
[ 13.461719] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee21df80)
[ 13.461733] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee21df40)
[ 13.461746] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee21dfc0)
[ 13.461760] [sw_udc]: alloc request: ep(0xbf213228, ep2-bulk, 512), req(0xee21de40)
[ 13.461825] nuke: ep num is 0
[ 13.461978] WRN:L1357(/pub/github/pcduino/a20-kernel/linux-sunxi/drivers/usb/sunxi_usb/udc/sw_udc.c):handle_ep0: ep0 setup end
[ 13.461996] nuke: ep num is 0
[ 13.795031] init: failsafe main process (381) killed by TERM signal
[ 14.331721] udevd[202]: renamed network interface wlan0 to wlan6
[ 15.028674] sunxi_gmac: probed
[ 15.028699] eth0: PHY ID 02430c54 at 1 IRQ 0 (sunxi_gmac-0:01) active
[ 15.221275] incomplete xfer (0x20)
[ 15.221295] [CSI_ERR][GC2035]Error -70 on register write
[ 15.221305] [CSI_ERR][GC2035]sensor_read err at sensor_detect!
[ 15.221313] [CSI_ERR][GC2035]chip found is not an target chip.
[ 15.221323] [CSI_ERR]sensor initial error when csi open!
[ 15.783259] ADDRCONF(NETDEV_UP): wlan6: link is not ready
[ 16.034723] init: isc-dhcp-server main process (530) terminated with status 1
[ 16.034924] init: isc-dhcp-server main process ended, respawning
[ 16.466798] init: isc-dhcp-server main process (563) terminated with status 1
[ 16.466970] init: isc-dhcp-server main process ended, respawning
[ 16.759039] init: isc-dhcp-server main process (644) terminated with status 1
[ 16.759230] init: isc-dhcp-server main process ended, respawning
[ 16.930697] init: isc-dhcp-server main process (654) terminated with status 1
[ 16.930910] init: isc-dhcp-server main process ended, respawning
[ 17.178408] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 17.197341] [DISP] layer allocated: 0,101
[ 17.229430] UMP: New session opened
[ 17.471137] get_hdmi_mode == HDMI
[ 18.378723] init: isc-dhcp-server main process (667) terminated with status 1
[ 18.378937] init: isc-dhcp-server main process ended, respawning
[ 18.516376] init: plymouth-stop pre-start process (711) terminated with status 1
[ 18.617222] init: tty1 main process (712) killed by TERM signal
[ 18.766472] init: isc-dhcp-server main process (723) terminated with status 1
[ 18.766651] init: isc-dhcp-server main process ended, respawning
[ 18.939671] init: isc-dhcp-server main process (748) terminated with status 1
[ 18.939862] init: isc-dhcp-server main process ended, respawning
[ 19.174677] init: isc-dhcp-server main process (765) terminated with status 1
[ 19.174868] init: isc-dhcp-server main process ended, respawning
[ 19.286679] init: isc-dhcp-server main process (786) terminated with status 1
[ 19.286858] init: isc-dhcp-server main process ended, respawning
[ 19.419380] init: isc-dhcp-server main process (793) terminated with status 1
[ 19.419558] init: isc-dhcp-server main process ended, respawning
[ 20.004312] init: isc-dhcp-server main process (808) terminated with status 1
[ 20.004478] init: isc-dhcp-server respawning too fast, stopped
[ 20.215710] ADDRCONF(NETDEV_CHANGE): wlan6: link becomes ready
[ 20.224183] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 20.224194] ==> rssi_level:0, rate_bitmap:0x000ff015
[ 21.786429] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 21.786438] ==> rssi_level:2, rate_bitmap:0x000ff000
[ 25.661147] sample_rate:44100 in get_audio_info
[ 30.931054] wlan6: no IPv6 routers present
[ 9051.642059] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9051.642069] ==> rssi_level:0, rate_bitmap:0x000ff015
[ 9051.786136] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9051.786146] ==> rssi_level:2, rate_bitmap:0x000ff000
[ 9151.704818] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9151.704828] ==> rssi_level:0, rate_bitmap:0x000ff015
[ 9151.792572] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9151.792581] ==> rssi_level:2, rate_bitmap:0x000ff000
[ 9764.064814] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9764.064824] ==> rssi_level:0, rate_bitmap:0x000ff015
[ 9765.797205] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 9765.797213] ==> rssi_level:2, rate_bitmap:0x000ff000
[10375.512315] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[10375.512326] ==> rssi_level:0, rate_bitmap:0x000ff015
[10375.795951] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[10375.795960] ==> rssi_level:2, rate_bitmap:0x000ff000
[10967.767252] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[10967.767262] ==> rssi_level:0, rate_bitmap:0x000ff015
[10967.795511] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[10967.795520] ==> rssi_level:2, rate_bitmap:0x000ff000
[12930.081429] ParseEDID
[12930.120350] EDID version: 1.3
[12930.120378] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[12930.153098] set to HDMI mode
[12930.153130] Parse_VideoData_Block: VIC 16 (native) support
[12930.153141] Parse_VideoData_Block: VIC 5 support
[12930.153150] Parse_VideoData_Block: VIC 4 support
[12930.153158] Parse_VideoData_Block: VIC 3 support
[12930.153166] Parse_VideoData_Block: VIC 2 support
[12930.153174] Parse_VideoData_Block: VIC 1 support
[12930.153182] Parse_VideoData_Block: VIC 31 (native) support
[12930.153191] Parse_VideoData_Block: VIC 22 support
[12930.153199] Parse_VideoData_Block: VIC 21 support
[12930.153207] Parse_VideoData_Block: VIC 20 support
[12930.153215] Parse_VideoData_Block: VIC 19 support
[12930.153223] Parse_VideoData_Block: VIC 18 support
[12930.153232] Parse_VideoData_Block: VIC 17 support
[12930.153240] Parse_AudioData_Block: max channel=2
[12930.153248] Parse_AudioData_Block: SampleRate code=7
[12930.153256] Parse_AudioData_Block: WordLen code=7
[12930.153264] Find HDMI Vendor Specific DataBlock
[12930.153281] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[12930.153296] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[12930.153311] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[12930.153327] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[12930.153341] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[12930.153369] get_hdmi_mode == HDMI
[12930.153381] sample_rate:44100 in get_audio_info
[16711.651124] ParseEDID
[16711.731066] EDID version: 1.3
[16711.731092] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[16711.814096] set to HDMI mode
[16711.814125] Parse_VideoData_Block: VIC 16 (native) support
[16711.814135] Parse_VideoData_Block: VIC 5 support
[16711.814143] Parse_VideoData_Block: VIC 4 support
[16711.814151] Parse_VideoData_Block: VIC 3 support
[16711.814159] Parse_VideoData_Block: VIC 2 support
[16711.814167] Parse_VideoData_Block: VIC 1 support
[16711.814175] Parse_VideoData_Block: VIC 31 (native) support
[16711.814184] Parse_VideoData_Block: VIC 22 support
[16711.814191] Parse_VideoData_Block: VIC 21 support
[16711.814199] Parse_VideoData_Block: VIC 20 support
[16711.814207] Parse_VideoData_Block: VIC 19 support
[16711.814215] Parse_VideoData_Block: VIC 18 support
[16711.814223] Parse_VideoData_Block: VIC 17 support
[16711.814232] Parse_AudioData_Block: max channel=2
[16711.814240] Parse_AudioData_Block: SampleRate code=7
[16711.814248] Parse_AudioData_Block: WordLen code=7
[16711.814256] Find HDMI Vendor Specific DataBlock
[16711.814272] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[16711.814286] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[16711.814301] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[16711.814316] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[16711.814330] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[16711.814358] get_hdmi_mode == HDMI
[16711.814367] sample_rate:44100 in get_audio_info
[25094.011127] ParseEDID
[25094.060153] EDID version: 1.3
[25094.060176] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[25094.098223] set to HDMI mode
[25094.098249] Parse_VideoData_Block: VIC 16 (native) support
[25094.098260] Parse_VideoData_Block: VIC 5 support
[25094.098269] Parse_VideoData_Block: VIC 4 support
[25094.098276] Parse_VideoData_Block: VIC 3 support
[25094.098284] Parse_VideoData_Block: VIC 2 support
[25094.098292] Parse_VideoData_Block: VIC 1 support
[25094.098300] Parse_VideoData_Block: VIC 31 (native) support
[25094.098309] Parse_VideoData_Block: VIC 22 support
[25094.098317] Parse_VideoData_Block: VIC 21 support
[25094.098325] Parse_VideoData_Block: VIC 20 support
[25094.098333] Parse_VideoData_Block: VIC 19 support
[25094.098341] Parse_VideoData_Block: VIC 18 support
[25094.098348] Parse_VideoData_Block: VIC 17 support
[25094.098357] Parse_AudioData_Block: max channel=2
[25094.098365] Parse_AudioData_Block: SampleRate code=7
[25094.098373] Parse_AudioData_Block: WordLen code=7
[25094.098380] Find HDMI Vendor Specific DataBlock
[25094.098398] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[25094.098413] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[25094.098428] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[25094.098443] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[25094.098458] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[25094.098484] get_hdmi_mode == HDMI
[25094.098494] sample_rate:44100 in get_audio_info
[26909.091056] ParseEDID
[26909.150158] EDID version: 1.3
[26909.150180] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[26909.201049] set to HDMI mode
[26909.201071] Parse_VideoData_Block: VIC 16 (native) support
[26909.201081] Parse_VideoData_Block: VIC 5 support
[26909.201090] Parse_VideoData_Block: VIC 4 support
[26909.201097] Parse_VideoData_Block: VIC 3 support
[26909.201105] Parse_VideoData_Block: VIC 2 support
[26909.201113] Parse_VideoData_Block: VIC 1 support
[26909.201121] Parse_VideoData_Block: VIC 31 (native) support
[26909.201130] Parse_VideoData_Block: VIC 22 support
[26909.201138] Parse_VideoData_Block: VIC 21 support
[26909.201146] Parse_VideoData_Block: VIC 20 support
[26909.201154] Parse_VideoData_Block: VIC 19 support
[26909.201161] Parse_VideoData_Block: VIC 18 support
[26909.201169] Parse_VideoData_Block: VIC 17 support
[26909.201178] Parse_AudioData_Block: max channel=2
[26909.201186] Parse_AudioData_Block: SampleRate code=7
[26909.201194] Parse_AudioData_Block: WordLen code=7
[26909.201202] Find HDMI Vendor Specific DataBlock
[26909.201217] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[26909.201232] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[26909.201246] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[26909.201261] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[26909.201275] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[26909.201301] get_hdmi_mode == HDMI
[26909.201311] sample_rate:44100 in get_audio_info